|
|
GUTMETAL, S.A. is prepared, through all its net of stores in Catalonia, to offer all types of structural profiles UPN, IPN, IPE, HEA, HEB, HEM, tailor-cut with the minimum tolerance accepted, as well as round corrugated B500S, plane, coiled, annealed and zinc-coated wire; commercial profiles, square and angled, simple T and U-shape, rectangular; round, square, rectangular, oval and screwed tubes; cold and hot-rolled sheet, pilled sheet, galvanized sheet, diamond, teardrop, stamped, pegaso, miniwave, trapezoidal, and other products such as profiles for ironwork and handrailing, open profiles, angles and Us, etc. No article is discarded, even though it is not included in our portfolio. All of them in all types and measures. This wide offer is completed with a transport service of our own, consisting of a fleet of lorries that are permanently in good condition since they are replaced upon completion of the depreciation period. All of the above makes it possible to guarantee our delivery commitments to a very high standard of accomplishment.
DETAILED PRODUCT RANGE:
(Measures expressed in mm or inches)
|
|
UPN DE 80 A 400 |
IPN DE 80 A 600 |
IPE DE 80 A 600 |
HEA DE 100 A 1000 |
HEB DE 100 A 1000 |
HEM DE 100 A 1000 |
UPN GALVANIZADA DE 40 A 100 |
IPN GALVANIZADA |
CORRUGADO DE 6 A 40 |
REDONDOS LISOS DE 6 A 62 |
REDONDOS EN ROLLO |
ALAMBRE RECOCIDO |
ALAMBRE GALVANIZADO |
MALLAZO DE 15X15X5 A 20X20X12 |
CUADRADOS DE 10 A 80 |
ANGULOS DE 20 A 200 |
ANGULOS DESIGUALES |
SIMPLES T DE 25 A 100 |
SIMPLES T GALVANIZADAS |
FORMAS EN U DE 40 A 60 |
PASAMANOS DE 10X3 A 400X30 |
PASAMANOS GALVANIZADOS DE 20X4 A 100X10 |
CHAPA INDUSTRIAL DE 8 A 70 |
CHAPA LAM. CALIENTE DE 1,5 A 10 (ANCHO DE BOBINA; 2000X1000; 2500X1250;3000X1500; 6000X1500;6000X2000) |
CHAPA DECAPADA DE 1,5 A 10 (ANCHO DE BOBINA: 2000X1000; 2500X1250;3000X1500) |
CHAPA LAM. FRIO DE 0,8 A 3 (ANCHO DE BOBINA; 2000X1000;2500X1250;3000X1500) |
CHAPA GALVA DE 0,5 A 3 (ANCHO DE BOBINA; 2000X1000; 2500X1250; 3000X1500) |
CHAPA LAGRIMADA DE 3/5 A 10/12 (ANCHO DE BOBINA; 2000X1000; 3000X1500) |
CHAPA ESTRIADA DE 3/5 A 10/12 (ANCHO DE BOBINA; 2000X1000; 3000X1500) |
TUBO LAM. FRIO REDONDO DE 8X0,8 A 76X2 |
TUBO LAM FRIO CUADRADO DE 10X0,8 A 50X2 |
TUBO LAM .FRIO RECTANGULAR DE 16X10X0,8 A 50X15X2 |
TUBO LAM FRIO OVALES DE 16X10X0,8 A 60X20X2 |
TUBO DECAPADO REDONDO DE 10X1,5 A 168X2 |
TUBO DECAPADO CUADRADO DE 10X1,5 A 100X2,5 |
TUBO DECAPADO RECTANGULAR DE 15X10X1,5 A 140X60X2 |
TUBO ESTRUCTURAL REDONDO DE 30X3 A 457X12 |
TUBO ESTRUCTURAL CUADRADO DE 25X3 A 300X10 |
TUBO ESTRUCTURAL RECTANGULAR DE 30X20X3 A 400X200X10 |
TUBO GALVANIZADO REDONDO DE 16X1 A 159X2 |
TUBO GALVANIZADO CUADRADO DE 14X1 A 100X2 |
TUBO GALVANIZADO RECTANGULAR DE 16X10X1 A 100X60X2 |
TUBO ISO L-II DE 3/8" A 6" (EN NEGRO Y EN GALVANIZADO) |
TUBO ACEROS SIN SOLDADURA DE 3/8" A 6" |
TUBO DIN 2448 DE 7" A16" |
PERFILES DE CARPINTERIA (DECAPADOS; GALVANIZADOS) |
PLACAS DE 200X10 A 500X30 |
PERFILES ABIERTOS DE 15X10X15X1,5 A 50X150X50X4 |
ANGULOS LAMINADOS EN FRIO 15X15X1,5 A 80X40X4 |
ANGULOS GALVANIZADOS DE 25 A 60 |
CHAPAS PERFORADAS DE 1 A 10 (CON REDONDOS DE 1 A 40) |
CHAPAS ESTAMPADAS |
CHAPAS PEGASO |
CHAPAS MINIONDA |
CHAPAS TRAPEZOIDALES |
ENTRAMADOS |
|
|
|
|